₹244,000.00

XPA-7 Gen3 7 Channel Audiophile Home Theater Power Amplifier

The new XPA-7 is a seven-channel audiophile quality power amplifier, and is perfect for powering:

All 7 main channels in a superb 7.1 channel home theater system
A high-end 5.1 channel system with bi-amped front speakers
The 7 main channels in an Atmos or DTS-X system with height speakers

Configuration:
7 x High-Powered Single-Channel Modules (all slots populated)

Power output:
200 watts/channel RMS into 8 Ohms; all channels driven
300 watts/channel RMS into 8 Ohms; two channels driven
490 watts/channel RMS into 4 Ohms; two channels driven

Description

Sound Quality First

Designed first and foremost to sound superb in all types of audio systems with all types of music.
Low noise, low distortion, wideband amplifier design with traditional Class A/B output stage ensures smooth, detailed sound, without a trace of strain or harshness.
Totally stable with real world speakers in real systems; not just on a test bench.

Modern Efficient Circuit Design

Optimized Soft-Switch Class H™ power supply topology delivers improved efficiency without compromising audio performance.
Switched Mode Power Supply (SMPS) offers all of the performance of a traditional linear power supply, with improved efficiency and reliability, and reduced overall weight.

Quality Construction

Top quality parts and construction throughout for years of reliable trouble-free service.
Heavy steel 4RU chassis with milled aluminum faceplate offers strength and rugged good looks.
Solid machined gold-plated RCA input connectors provide a reliable connection with a wide variety of audio interconnects.
Fully modular construction allows you to purchase as many channels as you need today, and then add more channels later when and if you need them.
Designed, assembled, and tested in the U.S.A. at our plant here in
Franklin, Tennessee

Flexible Signal Connections and Power Options

Gold plated five-way speaker binding posts with clear shields allow you to use a wide range of speaker cables with bare wires, lugs, or banana plugs.
Choice of balanced or unbalanced input for each channel, independently controlled by reliable metal toggle switches.
Remote trigger input and output allow the XPA-7 Gen3 to control and be controlled by other trigger-enabled equipment.
World compliant AC line voltage operation enables the XPA-7 Gen3 to operate on any line voltage between 100 VAC and 250 VAC 50/60Hz.
Standard IEC power inlet fits all standard IEC power cables and most custom audiophile power cables.

Protection

Audiophile-grade fault protection is entirely transparent under normal listening conditions, yet protects the amp and your other equipment from virtually all common faults.
The XPA-7 Gen3 is protected from AC line faults by a rugged resettable rear panel push-button circuit breaker.
Full five-year warranty ensures that you’ll be able to enjoy your XPA-7 Gen3 amplifier for years to come.

Additional information

Weight	24 kg
Circuit Topology	• The XPA-7 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection. • The XPA-7 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).
Audio Specifications	The XPA-7 Gen3 features seven of our High-Powered Single Channel Modules. • Power Output: 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven. 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven. 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven. 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven. 200 watts RMS/channel; THD<0.1%; 8 Ohms; ALL SEVEN channels driven. • Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB). • Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB. • THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms. • Signal to Noise Ratio (8 Ohm load): > 117 dB; ref FTC rated power; unbalanced input (A-weighted). > 91 dB; ref 1 watt; unbalanced input (A-weighted). • Minimum Recommended Load Impedance (per channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads). • Damping Factor (8 Ohm load): > 500. • Input Sensitivity (for rated power; 8 Ohm load): 1.5 V. • Gain: 29 dB. • Maximum Power Consumption: 2,600 watts. Note: The values shown refer to the amount of power the amplifier would consume while playing test tones continuously, on all channels, at full power, into a load bank. Therefore they are not at all characteristic of what you would expect when playing music or the sound track from a movie. Normal audio signals are dynamic, so the amount of power they require from second to second varies widely, and the average is far lower than this. With normal content, even playing very loudly, one of our amplifiers will consume far less power than indicated in the chart, so these values should not be considered to be a circuit requirement for normal operation. • Input Impedance: 33 kOhms (balanced). 23.5 kOhms (unbalanced).
Input And Output Connections	• Input Connections (High-Powered Single Channel Modules): Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable. • Input Connections (Stereo Modules): 2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable. • Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts. • Trigger: Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 120 mA.
General	Power Requirements • Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected). Front Panel Controls and Indicators • Standby: push button (halo ring changes color to indicate Standby or On). • Status LEDs: one per channel; blue. Status LEDs change to red to indicate a fault condition. Rear Panel Controls • AC Power switch: rocker switch (switches AC main power). • Status LEDs switch: disables front panel Status LEDs and dims Standby button halo. • Input selector switches (one per channel): metal toggle switches; select between balanced and unbalanced inputs. • Circuit Breaker: press button to reset circuit breaker. Protection • The XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
Dimensions	17” wide x 8” high x 19” deep (unboxed; including feet). 17” wide x 7” high x 19” deep (unboxed; without feet). 24-1/2” wide x 12” high x 24-3/4” deep (boxed).

X Series XPA 7